Frequency Response
23–22,000 Hz ±3dB
Horizontal Dispersion
30°
Vertical Dispersion
48" (122 cm) line source
High Frequency Transducer
XStat™ CLS™ electrostatic transducer
» Panel Dimensions
48" × 22" (121.9 × 55.9cm)
» Radiating Area
1056 in2 (6,814 cm2)
Low Frequency Transducer
Rear: 15” (38.1cm) cast basket, high excursion, rigid aluminum cone with extended throw drive assembly. Extensively vented triple shorting ring motor and 4-layer coil to eliminate compression and distortion.
Front: 12” (30.5cm) round cast aluminum alloy frame, high excursion, rigid carbon fiber sandwich cone with long throw design, 3-inch (7.5cm) diameter copper-clad aluminum flat wire voice coil, and vented pole piece and under-spider opening to reduce power compression.
Sensitivity
90 dB/2.83 volts/meter
Impedance
Nominal: 4 ohms, 0.43 ohms @ 20 kHz. . Compatible with 4, 6, or 8 Ohm rated amplifiers.
Recommended Amplifier Power
20âÂÂÂÂÂÂÂÂÂÂÂÂ1300 watts per channel
Crossover Frequency
60, 250–400 Hz
Components
High-Pass Crossover: 1% resistors mounted to heat sinks, polypropylene capacitors, air core inductors, dual toroidal audio transformers to drive electrostatic element Low-Pass Crossover: 1% resistors mounted to heat sinks, toroidal inductors, supports user options to modify sound output via jumpers
Audio Controls
Bass Control:
0dB, -4dB, -8dB
Distance Control:
3 meters (or less), 4 meters, 5 meters (or greater)
Lighting
LED intensity control: On, Dim, Off
Cabinet
Phenolic Resin Polymer: Dense substrate with superb mechanical strength to minimize cabinet vibrations caused by woofer cone motion counter forces to provide an ideal baffle for the electrostatic panel and woofers.
Inputs
WBT-0705Ag nextgen™ 5-way bi-wire binding posts feature a filigree signal conductor made from fine silver for high conductivity. Fully insulated for CE and IEC conformity providing shock hazard protection. Free from eddy current effects. Max constant current 30 A, admissible peak current 200 A. Outer metal cap with palladium plated finish.
Power Draw
Standby: 1W each Max: 15W each
Weight
385 lbs. (175 kg
Dimensions
74.8" × 30.3" × 34.2"
(189.9cm × 76.9cm × 87cm)
Martin Logan Neolith
For those who appreciate accuracy and realism in their audio, the electrostatic transducer is the grail. For those who understand this truth in sound, MartinLogan introduces their new flagship loudspeaker: Neolith.
Martin Logan Neolith is not for the faint of heart. As the embodiment of our philosophy of the truth in sound, its performance is unconstrained. It goes against the grain. In a world of small, Neolith says size is no impediment.
Neolith features one of MartinLogan's largest electrostatic radiating surfaces, fully 35% larger than the Statement E2. Its proprietary curvilinear electrostatic transducer delivers an ideal wave launch; a detailed, ultra realistic soundstage, reproducing nearly the entire mid-range and high frequency audio spectrum. It is utterly uninhibited by room limitations.
A 15-inch rear-firing ported woofer provides smoothly blended low frequencies and 12-inch front firing sealed mid-bass woofer. Combined, they deliver powerful, extremely accurate bass.
And this is just the beginning. The details demand your attention. The exclusive advanced-topology Vojtko Crossover uses hand-selected components for optimum power handling. The passive Neolith design gives you more control, allowing single-wire or bi-amp connections with silver filigree WBT Binding Posts, plus a unique system of audio adjustment jumpers. The audaciously sculpted Neolith frame is made of non-resonant Phenolic Resin Polymer, smoothly finished in a premium automotive gloss. Its handcrafted woofer cabinet is wrapped in elegant soft leather.
Prepare yourself for an astonishing new audio experience; a bigger, bolder, no-holds-bared experience of breathtakingly articulate performance. The bespoke Neolith is the culmination of over 30 years of MartinLogan passion, engineering innovation and dedication to the ultimate truth in sound.