Technical specifications E-Glo S
Input impedance MC 10,25,50,75,100,1000 Ohm
Load capacity 50,100,150,200,270,320,420 pF
Output impedance - 100 ohms
Gain MM 45dB
Gain MC 45,50,55,65,70 dB
RIAA accuracy within 0,5dB/20Hz - 20kHz
Subsonic 18dB/Octave
Input RCA
Output RCA
Power supply DC18V/1
Power consumption ? watts max / 0,5 watts standby
Dimensions W x H x D 435 x 90 x 270 mm
E-Glo S
Tube phono preamplifier
· Hybrid tube design with ECC83 twin triode
· MM & MC capability
· Precise RIAA equalisation
· Adjustable impedance and capacitance
· Subsonic filter switchable
· Ultra low noise circuitry
· Advanced power supply with voltage filtration
· Aluminium casing with wooden side panels
Elegant high-end tube phono pre-amplifier with ultra slim design!
E-glo S – is a hybrid phono preamplifier that utIlizes ECC83 tubes (twin triode) in the first and second gain stages In order to get higher gain and lower noise we use in the first stage a cascode connection of tube with with two paralelly connected low-noise J-FET transistors.
RIAA curve is equalised fully passive and splitted in two steps which allows to achieve perfect impedance matching between the gain stage and equalization block. Phono preamplifier doesn’t have any global feedback. It has a massive aluminium chassis, large possibility of adjusting the impedance, capacity and gain. It has subsonic filter with mild effect which doesn’t affect audible frequencies in unpleasant way.
A very important part is the advanced power supply that uses anode voltage regulation and a well filtrated voltage. Filtration is in three steps, this result is a perfect S/N ratio and undisturbed musical experience.