|
Inputs
|
1 XLR Stereo
|
|
Power output, 8Ω (1 kHx @ 0.2% THD+N)
|
1700W per channel
|
|
Power output, 4Ω (1 kHx @ 0.2% THD+N)
|
3200W per channel*
|
|
Power output, 2Ω (1 kHx @ 0.2% THD+N)
|
5600W per channel*
|
|
Power output, 8Ω bridged
|
6000W per channel*
|
|
Power output, 4Ω bridged
|
11000W per channel*
|
|
|
|
|
Outputs
|
Metal binding posts
|
|
Frequency response
|
0.5 Hz to 100 kHz, +0/0.1 dB
|
|
THD+N (1 kHz @ 90% of rated power)
|
<0.05% 10 Hz to 20 kHz
|
|
Gain
|
4.5v/27.7db, 9v/21.7 db switchable
|
|
Output impedance
|
0.1Ω
|
|
Damping factor (8Ω load)
|
>200
|
|
Signal-to-noise ratio
|
>114 dB
|
|
Input impedance
|
360KΩ
|
|
Weight
|
250 lbs. / 114kg
|
|
Dimensions
|
18.5"/470mm X 32.5"/825mm X 12.5"/317mm (WDH)
|
he Statement Mono amplifier combines the musicality of classic amplifiers with effortless power made possible through an entirely fresh approach to amplifier power supplies.
Our new Constellation Switched-Mode Power Supply (C-SMPS) with Power Factor Correction (PFC) ensures that the Statement Mono performs at its absolute best with any speaker and AC power standard. No transformer-based linear power supply can make this claim.
Our Statement Mono is not just an amplifier; it’s a unique blend of musical and technological prowess. Its outstanding design is evident in the illuminated front power meter, calibrated for the Statement Mono, which dramatically displays its capabilities. The titanium top grilles ensure rapid, effective heat dissipation, setting it apart from the rest.
For those whose passion for music knows no bounds and who insist on the absolute best possible reproduction of the performances they love, the Statement Mono will be the amplifier of a lifetime that consistently delivers satisfying, flawless performances no matter where your musical journey takes you.
The Statement Mono delivers 1700 watts into 8 ohms, 1600w into 4 ohms, and rises to an incredible 6000 watts when two Statement Monos are bridged-although in these cases, the output will be determined by your AC power, not by the amplifier. We can achieve this extraordinary result because of the consistently excellent performance of the C-SMPS and because we fitted the Statement Mono’s output stage with 96 output transistors.
Because the input stage is the first circuit an audio signal encounters, we took special care with the one in the Statement Mono. It uses a fully balanced, mirror-imaged input stage with paralleled amplification modules, which lowers noise by 5 dB. The input stage has its own power supply, a three-stage, fully regulated design that further reduces noise.
Most high-end amplifiers are held back by using legacy power-supply technology that cannot adjust to different speaker loads and AC power standards. PFC provides perfectly stable 380-volt power at any AC voltage standard, with the voltage and current always in phase no matter the speaker’s load. Under any conditions, with any speaker, the amplifier gets the power it needs. Thanks to our ultra-quiet C-SMPS technology, power-supply noise is reduced by more than 20 dB.
