Home Theatre

Stereo valve preamplifier
<< Previous 1 2 3 4 Next >> All

 

Classic Preamplifier

1 x XLR and 4 x RCA inputs enable the Classic PREAMP to be connected to a variety of sources. 2 x XLR and 1 x RCA outputs allow the Classic PREAMP to be connected to two power amps if required for a monobloc solution. A true bypass XLR connector allows the machine to be hooked up to a high-end home cinema to benefit from a power amp downstream and provide a neat cabling solution. Op...[more]

Stereo valve preamplifier

EVO 100 Preamplifier

The EVO Tube Preamplifier is the newest version of the original first high-quality tube product. The PrimaLuna EVO Tube Preamplifier main features: 1. Hand-made construction of a heavy-gauge, fully-vented steel chassis with a five coat finish, each coat hand-rubbed and polished, holding the finest point-to-point wiring, using workmanship that is normally only available at the highest pr...[more]

Stereo valve preamplifier

EVO 200 Preamplifier

The EVO Tube Preamplifier is the newest version of the original first high-quality tube product. The PrimaLuna EVO Tube Preamplifier main features: 1. Hand-made construction of a heavy-gauge, fully-vented steel chassis with a five coat finish, each coat hand-rubbed and polished, holding the finest point-to-point wiring, using workmanship that is normally only available at the highest pr...[more]

Stereo valve preamplifier

EVO 300 Preamplifier

The EVO Tube Preamplifier is the newest version of the original first high-quality tube product. The PrimaLuna EVO Tube Preamplifier main features: 1. Hand-made construction of a heavy-gauge, fully-vented steel chassis with a five coat finish, each coat hand-rubbed and polished, holding the finest point-to-point wiring, using workmanship that is normally only available at the highest pr...[more]

Stereo valve preamplifier

EVO 400 Preamplifier

The EVO Tube Preamplifier is the newest version of the original first high-quality tube product. The PrimaLuna EVO Tube Preamplifier main features: 1. Hand-made construction of a heavy-gauge, fully-vented steel chassis with a five coat finish, each coat hand-rubbed and polished, holding the finest point-to-point wiring, using workmanship that is normally only available at the highest pr...[more]

Stereo valve preamplifier

HD Preamp

The HD PREAMP has the best specifications ever achieved by any tube preamplifier, a floor noise lower than -160 dB and 5 Hz to 200kHz frequency response with perfect phase integrity. The impedance input is 50 k Ohm and the output impedance is as low as 0.2 Ohm so that you can drive any amplifier on the market. The HD PREAMP is able to accurately reproduce a square wave at 16 Hz...[more]

Stereo valve preamplifier

JP200MC

Stereo valve preamplifier

JP80MC

JP 80 MC This preamplifier creates a visual effect of abundance from the point of view of colours and forms as well as an optimal use of space. ...[more]

Stereo valve preamplifier

JPL

JPL  The sober and elegant JPL monoblock preamplifier, its protective grill and the height of the face plate masking its component parts, never fails to arouse our curiosity through its discreet appearance. This preamplifier is made up of three 12AX7 double triodes. The gain , of about 35 dB, is supplied by the first two tubes mounted in series. The last tube is used as a cathode follo...[more]

Stereo valve preamplifier

JPL MKII

The JPL will bring you an inherent sense of dynamic gradation, but also soundstage transparency and mastery over the elements of spatial resolution. I never felt that the Jadis was holding back or blunting the power and rise-time of orchestral peaks. I've never heard a preamp so convincingly delineate the dynamic range from soft to very loud. This is one of those rare products guarantee...[more]

Stereo valve preamplifier
<< Previous 1 2 3 4 Next >> All